Add stuff from askiiart/pc-configs

docs/Debian/find-fastest-apt-mirror.md

@@ -0,0 +1,39 @@
+# Find Fastest Mirror
+
+You can find the fastest apt mirror using `netselect-apt`. Install it with:
+
+```bash
+sudo apt install netselect-apt
+```
+
+Then run it:
+
+```bash
+sudo netselect-apt -c US -a amd64 -n stable
+```
+
+You should get something like this:
+
+```text
+Running netselect to choose 10 out of 33 addresses.     
+..............................................................................................................................................................................................................................
+The fastest 10 servers seem to be:
+
+	http://mirror.dal.nexril.net/debian/
+	http://mirror.us.oneandone.net/debian/
+	http://mirrors.gigenet.com/debian/
+	http://mirror.steadfast.net/debian/
+	http://mirrors.xtom.com/debian/
+	http://la.mirrors.clouvider.net/debian/
+	http://mirror.keystealth.org/debian/
+	http://mirror.clarkson.edu/debian/
+	http://ftp.us.debian.org/debian/
+	http://mirror.cogentco.com/debian/
+
+Of the hosts tested we choose the fastest valid for http:
+        http://mirror.dal.nexril.net/debian/
+
+Writing sources.list.
+sources.list exists, moving to sources.list.1672257815
+Done.
+```

docs/Debian/port-53-in-use.md

@@ -0,0 +1,39 @@
+# Port in use (connman)
+
+## Problem
+
+When trying to run DNS thing, `connman` is already using port 53.
+
+```bash
+docker compose up --detach --build --remove-orphans
+[+] Running 0/1
+ ⠿ Container pihole  Starting                                                       0.2s
+Error response from daemon: driver failed programming external connectivity on endpoint pihole (bc535387671f0d471f11f8ade5eedc4771126c057e2099931e8ef49461111149): Error starting userland proxy: listen tcp4 0.0.0.0:53: bind: address already in use
+```
+
+## Solution
+
+- Find the `connman.service` file:
+
+```bash
+grep -Ril "connman" /etc/systemd/
+```
+
+- Add `--nodnsproxy` to the `ExecStart` line:
+
+```bash
+ExecStart=/usr/sbin/connmand -n --nodnsproxy
+```
+
+- Reload and restart stuff:
+
+```bash
+systemctl daemon-reload
+systemctl restart connman.service
+```
+
+- Try your thing again. For example:
+
+```bash
+docker compose up -d --remove-orphans
+```

docs/Debian/privilged-ports.md

@@ -0,0 +1,15 @@
+# Port is privileged, cannot be used
+
+When running a container that uses a priviledged port, AKA anything less than 1024, you will get the following error:
+
+```text
+Error starting userland proxy: error while calling PortManager.AddPort(): cannot expose privileged port 80, you can add 'net.ipv4.ip_unprivileged_port_start=80' to /etc/sysctl.conf
+```
+
+To fix this, you need to add the following to your `/etc/sysctl.conf` file:
+
+```conf
+net.ipv4.ip_unprivileged_port_start=0
+```
+
+Then, you can just run the container again.

docs/Docker/fix-apipa-veth.md

@@ -0,0 +1,26 @@
+# Fix APIPA (veth)
+
+## Problem
+
+On Debian 11, when:
+
+1. Using docker containers that use the `host` network mode.
+2. `PreferredTechnologies` is set to `ethernet,[...]` in `/etc/connman/main.conf`.
+   - This may not be a problem when ethernet is plugged in, not just wifi.
+
+The system **uses a veth interface** to connect to the internet, which uses an APIPA (169.254.*.*) IP address, so the system can only contact devices on the LAN.
+
+## Solution
+
+Edit `/etc/connman/main.conf` and uncomment the line `# NetworkInterfaceBlacklist = vmnet,vboxnet,virbr,ifb,ve-,vb-`
+
+Result:
+
+```conf
+NetworkInterfaceBlacklist = vmnet,vboxnet,virbr,ifb,ve-,vb-
+```
+
+## References
+
+- [A tale of Docker and Linux ConnMan](https://sitaram.substack.com/p/a-tale-of-docker-and-linux-connman)
+- [Arch Linux Docs](https://wiki.archlinux.org/title/ConnMan#Blacklist_interfaces)

docs/Docker/move-volume.md

@@ -0,0 +1,24 @@
+# Move Docker program data
+
+Docker stores all its data in `/var/lib/docker` by default. This is usually fine, but this directory grows quickly, so we'll move it to `/mnt/big-stuff/docker-program-data/`
+
+Edit `/lib/systemd/system/docker.service` and add the `--data-root` option to the ExecStart line:
+
+```sh
+ExecStart=/usr/bin/dockerd --data-root /mnt/big-stuff/docker-program-data/ -H fd:// $DOCKER_OPTS
+```
+
+If you've already done stuff with docker, you'll need to move the data:
+
+```sh
+sudo systemctl stop docker
+sudo mv /var/lib/docker/ /mnt/big-stuff/docker-program-data/
+sudo systemctl daemon-reload
+sudo systemctl start docker
+```
+
+You may also need to set up some symlinks:
+
+```bash
+ln -s source_file link_file
+```

docs/Docker/resource.limits.md

@@ -0,0 +1,44 @@
+# Resource limits
+
+You can limit the amount of CPU and/or memory resources that a container can use.
+
+## CPU
+
+| Option | Description |
+|--------|-------------|
+| `--cpus` | Set number of CPUs thee container can use |
+| `--cpu-period` | Limits the length of time it can schedule the CPU before being throttled (used alongside `--cpu-quota`) |
+| `--cpu-quota` | The throttling setting activated when the CPU is scheduled longer than `--cpu-period` |
+| `--cpuset-cpus` | Limit the container to specific CPUs or cores (e.g. 0-3, 0,1) |
+| `--cpu-shares` | The number of relative shares of the CPU the container can use (default 1024) |
+
+## Memory
+
+A markdown table:
+
+| Option | Description |
+|--------|-------------|
+| `-m` or `--memory` | Memory limit (minimum 6m (megabytes)) |
+| `--memory-swap` | How much swap is available - [details](https://docs.docker.com/config/containers/resource_constraints/#--memory-swap-details) |
+| `--memory-swappiness` | "By default, the host kernel can swap out a percentage of anonymous pages used by a container. You can set --memory-swappiness to a value between 0 and 100, to tune this percentage" - [details]() |
+| `--memory-reservation` | Soft limit less than `--memory` (for when there is low memory on host), *soft* limit, so usage may exceed this. |
+| `--oom-kill-disable` | Disable OOM Killer (stops from killing container processes when out-of-memory error occurs) - Make sure to use `-m`, or host processes could be killed |
+
+## Example
+
+Note: `--xxxx 4` in `docker run` would be replaced with `xxxx` in `docker-compose.yml`. See below:
+
+```yml
+service:
+  image: nginx
+  mem_limit: 512m
+  mem_reservation: 128M
+  cpus: 0.5
+  ports:
+    - "80:80"
+```
+
+## See also
+
+- [Docker documentation](https://docs.docker.com/config/containers/resource_constraints/)
+- [Baeldung docs](https://www.baeldung.com/ops/docker-memory-limit) (includes `docker compose` examples)

docs/Docker/restart-policies.md

@@ -0,0 +1,27 @@
+# Restart Policies
+
+Restart policies control whether and how Docker attempts to restart a container.
+
+| option | description |
+| ------ | --- |
+| no | does not restart automatically |
+| on-failure[:max-retry] | restarts only when the container exits with a non-zero exit code, and when it has been restarted fewer than max-retry times. |
+| always | always restarts the container if it stops. If it is manually stopped, it is restarted only when Docker daemon restarts or the container itself is manually restarted. |
+| unless-stopped - always restarts the container unless it is manually stopped. Does not restart when the docker daemon is restarted. |
+
+If no restart policy is provided, the default is no.
+
+## Example
+
+```yaml
+version: '3.3'
+services:
+    simple-torrent:
+        ports:
+            - '3000:3000'
+        volumes:
+            - '/path/to/my/downloads:/downloads'
+            - '/path/to/my/torrents:/torrents'
+        image: boypt/cloud-torrent
+        restart: unless-stopped
+```

docs/Miscellaneous/470-datacenter-drivers.md

@@ -0,0 +1,125 @@
+# Nvidia 470 datacenter drivers
+
+**Note:** Desktop drivers and datacenter drivers are different.
+
+## Debian
+
+This hasn't yet been tested. If you have tested it, please open a PR to update this section.
+
+### Add apt repos
+
+**You can skip this if you already have the repositories enabled**
+To add the non-free and contrib repos, edit `/etc/apt/sources.list` and add `non-free contrib` to the end of each line, like this:
+
+```txt
+deb http://deb.debian.org/debian/ bullseye main non-free contrib
+deb-src http://deb.debian.org/debian/ bullseye main non-free contrib
+```
+
+Then, run `apt update`
+
+### Installation
+
+To install the driver:
+
+```sh
+apt install nvidia-tesla-470-driver
+```
+
+And to install CUDA:
+
+```bash
+apt install nvidia-cuda-dev nvidia-cuda-toolkit
+```
+
+### Links
+
+- [Driver Install Guide](https://wiki.debian.org/NvidiaGraphicsDrivers) ([Internet Archive Link](https://web.archive.org/web/20221123184836/https://wiki.debian.org/NvidiaGraphicsDrivers))
+
+## Fedora
+
+This guide uses the RPM Fusion repositories, and if you install CUDA, it uses Nvidia repositories as well. Note that this guide is only compatible with Fedora 35+, I'm not sure about RHEL versions.
+
+### Add RPM Fusion repository
+
+**You can skip this if you already have the repository installed.**
+
+To add the RPM Fusion repository:
+
+```bash
+# Add gpg key
+sudo dnf install distribution-gpg-keys
+sudo rpmkeys --import /usr/share/distribution-gpg-keys/rpmfusion/RPM-GPG-KEY-rpmfusion-free-fedora-$(rpm -E %fedora)
+# Add repo with gpg check
+sudo dnf --setopt=localpkg_gpgcheck=1 install https://mirrors.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm
+```
+
+### Install Driver
+
+First, update everything, and reboot if you're not on the latest kernel.
+
+```bash
+dnf update -y
+```
+
+Then, install the driver:
+
+```bash
+dnf install akmod-nvidia-470xx
+```
+
+_**Do not reboot yet.**_
+
+Before rebooting, use `top` or `ps` to make sure there is no `akmods`, `cc*`, `kthreadd`, or `gcc*` process running (`*` is either nothing or a number)—or anything using tons of CPU that you don't expect.
+
+*Note:* `nvidia-smi` and other tools are not included with the driver. For that, you need to install CUDA.
+
+### Install CUDA
+
+Install packages needed for CUDA with:
+
+```bash
+export FEDORA_VERSION=$(rpm -E %fedora) # Nvidia's repo doesn't support Fedora 38 yet, so change this to 37 if you're on Fedora 38
+dnf config-manager --add-repo https://developer.download.nvidia.com/compute/cuda/repos/fedora35/x86_64/cuda-fedora${FEDORA_VERSION}.repo
+dnf clean all
+dnf module disable nvidia-driver
+dnf -y install cuda
+```
+
+*Note:* Don't re-enable `nvidia-driver`
+
+### Problems
+
+#### Suspend Issues
+
+I had issues with my K80 not working after being suspended. For example, `torch.cuda.is_available()` would give an error and return False, rather than saying True.
+To fix this, install `xorg-x11-drv-nvidia-470xx-power`
+
+```bash
+dnf install xorg-x11-drv-nvidia-470xx-power
+```
+
+---
+
+#### CUDA is higher version than driver
+
+Sometimes the driver in the CUDA repo, and therefore dependencies for CUDA are of a later version than the driver. To fix this, run:
+
+```bash
+dnf module enable nvidia-driver -y && dnf download cuda-drivers && dnf module disable nvidia-driver -y
+rpm -Uvh cuda-drivers*.rpm --nodeps
+dnf update
+```
+
+### More stuff
+
+Why not install `xorg-x11-drv-nvidia-470xx`?
+
+- That's the _display_ driver, not the data center driver. It is the same version number, but is not the same.
+
+### Links
+
+- [Repo Config](https://rpmfusion.org/Configuration) ([Internet Archive Link](https://web.archive.org/web/20221111180224/https://rpmfusion.org/Configuration))
+- [Verify Repo Signing Keys](https://rpmfusion.org/keys) ([Internet Archive Link](https://web.archive.org/web/20221111180744/https://rpmfusion.org/keys))
+- [NVIDIA Guide](https://rpmfusion.org/Howto/NVIDIA) ([Internet Archive Link](https://web.archive.org/web/20221111181211/https://rpmfusion.org/Howto/NVIDIA))
+- [CUDA Guide](https://rpmfusion.org/Howto/CUDA) ([Internet Archive Link](https://web.archive.org/web/20221111181243/https://rpmfusion.org/Howto/CUDA))

docs/Miscellaneous/b450m-ds3h-wifi-firmware.md

@@ -0,0 +1,28 @@
+# Install Firmware
+
+## During Linux Installation
+
+When installing Linux, you may get an error like this:
+
+```
+Some of your hardware needs non-free firmware files to operate. The firmware can be loaded from removable media, such as a USB stick or floppy.
+
+The missing firmware files are: iwlwifi-3168-29.ucode iwlwifi-3168-28.ucode iwlwifi-3168-27.ucode iwlwifi-3168-26.ucode iwlwifi-3168-25.ucode iwlwifi-3168-24.ucode iwlwifi-3168-23.ucode iwlwifi-3168-22.ucode
+
+If you have such media available now, insert it, and continue.
+
+Load missing firmware from removable media?
+[ ] No
+[x] Yes
+```
+
+These are all actually just different versions of the one firmware file you need. Just get `iwlwifi-3168-29.ucode` from [here](iwlwifi-3168-29.ucode) or [here](/static/iwlwifi-3168-29.ucode), put it on another USB drive, then insert it and continue.
+
+## Post-Installation
+
+Get the firmware from [here](iwlwifi-3168-29.ucode), then move it to `/lib/firmware`, and restart.
+
+```bash
+sudo mv iwlwifi-3168-29.ucode /lib/firmware/
+reboot
+```

docs/Miscellaneous/mount-drive-on-boot.md

@@ -0,0 +1,20 @@
+# Mount Drive On Boot
+
+To mount a drive on boot, first find the UUID of the drive:
+
+```bash
+sudo blkid
+```
+
+Then add the following to `/etc/fstab`:
+
+```conf
+UUID=<UUID_OF_DRIVE> /mnt/big-stuff  ext4    defaults
+```
+
+For example, for my big drive (4TB Toshiba X300 Performance):
+
+```conf
+# big-stuff
+UUID=d68f1a75-af20-4627-8382-7198c3a34b5d /mnt/big-stuff  ext4    defaults
+```

docs/Miscellaneous/spice-guest-tools.md

@@ -0,0 +1,15 @@
+# Spice Guest Tools
+
+These are the software packages for the guest OS that provide stuff like copy-paste, shared folders, graphics drivers, etc. They're not required, but are quite useful (and tiny!)
+
+## Windows
+
+The download is [here](https://www.spice-space.org/download/windows/spice-guest-tools/spice-guest-tools-latest.exe), it's easy. Just install it and restart.
+
+## Linux
+
+Linux guests use the packages `spice-vdagent` (for copy-paste, shared folders, etc.) and `xf86-video-qxl` (for graphics drivers) (or `xf86-video-qxl-devel` if you're building from source, according to GitHub copilot, IDK). The `spice-vdagent` package is available in most distributions' repositories, but the `xf86-video-qxl` package is not. You can build it from source (download [here](https://www.spice-space.org/download.html)).
+
+## macOS
+
+No. Maybe the Linux ones would work, IDK. I don't feel like testing it. Check out [this](https://github.com/utmapp/UTM/discussions/3772) and [this](https://docs.getutm.app/).

docs/blog/index.md

@@ -1,2 +0,0 @@
-# Blog
-

docs/index.md

@@ -1,3 +1,3 @@
 # Wiki
 
-Wiki and stuff.
+wow it's a wiki

mkdocs.yml

@@ -7,7 +7,7 @@ theme:
   name: material
   custom_dir: overrides
   language: en
-  favicon: images/askiiart.gif
+  favicon: static/askiiart.gif
   icon:
     repo: fontawesome/brands/git-alt
     logo: fontawesome/regular/folder-open
@@ -41,10 +41,6 @@ theme:
     - navigation.path # breadcrumbs at the top of each page
     - search.suggest
 plugins:
-  - blog:
-      categories: false
-      archive: false
-  #- git-revision-date
   - search
 markdown_extensions:
   - admonition # enables coloured blocks mid article

requirements.txt

@@ -1,3 +1,2 @@
 mkdocs
-mkdocs-material
-mkdocs-material-extensions
+mkdocs-material