Fixed some minor stuff; more clear now
This commit is contained in:
parent
c3a988f7c7
commit
df96317249
1 changed files with 6 additions and 2 deletions
|
@ -3,15 +3,18 @@
|
||||||
This will determine the speed your fan (connected to your Arduino) should run at based on the highest temperature
|
This will determine the speed your fan (connected to your Arduino) should run at based on the highest temperature
|
||||||
between your GPUs, then will send that speed to your Arduino.
|
between your GPUs, then will send that speed to your Arduino.
|
||||||
|
|
||||||
|
Make sure to set the port in the .py file you use!
|
||||||
|
|
||||||
---
|
---
|
||||||
|
|
||||||
### How to use
|
### How to use
|
||||||
1. Connect the Arduino to the fan according to this diagram:
|
1. Connect the Arduino to the fan according to this diagram:
|
||||||
|
|
||||||
![PWM connected to pin 9, TACH not connected](Images/arduino-fan-diagram.png)
|
![PWM connected to pin 9, TACH not connected](Images/arduino-fan-diagram.png)
|
||||||
2. **Connect the Arduino to your PC via USB, then find its port and set the port variable**
|
2. Run `tx_speed.py`, and upload `rx_speed.ino` to your Arduino Uno.
|
||||||
|
3. **Set the port variable**
|
||||||
1. Instructions for finding the port are in the Python code.
|
1. Instructions for finding the port are in the Python code.
|
||||||
3. Revel in your success!
|
4Revel in your success!
|
||||||
1. If you plan to use this constantly, make sure to create a service that starts the Python code on boot.
|
1. If you plan to use this constantly, make sure to create a service that starts the Python code on boot.
|
||||||
|
|
||||||
### My setup
|
### My setup
|
||||||
|
@ -30,6 +33,7 @@ Pictures will be added later once my setup is complete. Don't expect it to happe
|
||||||
- You may need to change some variables in the Arduino code depending on your fan's specifications.
|
- You may need to change some variables in the Arduino code depending on your fan's specifications.
|
||||||
- Try looking up a datasheet
|
- Try looking up a datasheet
|
||||||
- This was designed for an Arduino Uno, and should work on one. I don't know about running it on anything else, though.
|
- This was designed for an Arduino Uno, and should work on one. I don't know about running it on anything else, though.
|
||||||
|
- I'm busy, so a lot of the files are probably still broken. However, the main stuff is working.
|
||||||
|
|
||||||
---
|
---
|
||||||
|
|
||||||
|
|
Loading…
Reference in a new issue