Initial commit; not completed
This commit is contained in:
parent
cd61cdb99c
commit
0121ec7e84
1 changed files with 70 additions and 0 deletions
70
Demos/Arduino/display_rx.ino
Normal file
70
Demos/Arduino/display_rx.ino
Normal file
|
@ -0,0 +1,70 @@
|
|||
#include "SerialTransfer.h"
|
||||
|
||||
// This program will take an number from the PC and display it using LEDs to represent it as a binary number
|
||||
|
||||
SerialTransfer myTransfer;
|
||||
|
||||
const byte OC1A_PIN = 9;
|
||||
const byte OC1B_PIN = 10;
|
||||
|
||||
const word PWM_FREQ_HZ = 25000; //Adjust this value to adjust the frequency (Frequency in HZ!) (Set currently to 25kHZ)
|
||||
const word TCNT1_TOP = 16000000/(2*PWM_FREQ_HZ);
|
||||
|
||||
int pin1=8; //initializing pins as vars because who wants to use constants:
|
||||
int pin2=7;
|
||||
int pin3=6;
|
||||
int pin4=5;
|
||||
int pin5=4;
|
||||
int pin6=3;
|
||||
int pin7=2;
|
||||
|
||||
void setup() {
|
||||
// Setup Serial transfer with PC
|
||||
Serial.begin(115200);
|
||||
myTransfer.begin(Serial);
|
||||
|
||||
pinMode(OC1A_PIN, OUTPUT);
|
||||
|
||||
// Clear Timer1 control and count registers
|
||||
TCCR1A = 0;
|
||||
TCCR1B = 0;
|
||||
TCNT1 = 0;
|
||||
|
||||
// Set Timer1 configuration
|
||||
// COM1A(1:0) = 0b10 (Output A clear rising/set falling)
|
||||
// COM1B(1:0) = 0b00 (Output B normal operation)
|
||||
// WGM(13:10) = 0b1010 (Phase correct PWM)
|
||||
// ICNC1 = 0b0 (Input capture noise canceler disabled)
|
||||
// ICES1 = 0b0 (Input capture edge select disabled)
|
||||
// CS(12:10) = 0b001 (Input clock select = clock/1)
|
||||
|
||||
TCCR1A |= (1 << COM1A1) | (1 << WGM11);
|
||||
TCCR1B |= (1 << WGM13) | (1 << CS10);
|
||||
ICR1 = TCNT1_TOP;
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
||||
if(myTransfer.available())
|
||||
{
|
||||
|
||||
// send all received data back to Python
|
||||
for(uint16_t i=0; i < myTransfer.bytesRead; i++){
|
||||
myTransfer.packet.txBuff[i] = myTransfer.packet.rxBuff[i];
|
||||
}
|
||||
myTransfer.sendData(myTransfer.bytesRead);
|
||||
|
||||
int x = int(myTransfer.packet.rxBuff);
|
||||
if((x % 2) > 0) { digitalWrite(pin1, HIGH); } else { digitalWrite(pin1, LOW); }
|
||||
if((x % 4) > 1) { digitalWrite(pin2, HIGH); } else { digitalWrite(pin2, LOW); }
|
||||
if((x % 8) > 3) { digitalWrite(pin3, HIGH); } else { digitalWrite(pin3, LOW); }
|
||||
if((x % 16) > 7) { digitalWrite(pin4, HIGH); } else { digitalWrite(pin4, LOW); }
|
||||
if((x % 32) > 15) { digitalWrite(pin4, HIGH); } else { digitalWrite(pin4, LOW); }
|
||||
if((x % 64) > 31) { digitalWrite(pin4, HIGH); } else { digitalWrite(pin4, LOW); }
|
||||
if((x % 128) > 63) { digitalWrite(pin4, HIGH); } else { digitalWrite(pin4, LOW); }
|
||||
}
|
||||
}
|
||||
|
||||
void setPwmDuty(byte duty) {
|
||||
OCR1A = (word) (duty*TCNT1_TOP)/100;
|
||||
}
|
Loading…
Reference in a new issue