diff --git a/Marlin/Ender-3 Pro/Boot screens/Bad_Apple_Bootscreen.h b/Ender-3 Pro/Marlin/Boot screens/Bad_Apple_Bootscreen.h
similarity index 100%
rename from Marlin/Ender-3 Pro/Boot screens/Bad_Apple_Bootscreen.h
rename to Ender-3 Pro/Marlin/Boot screens/Bad_Apple_Bootscreen.h
diff --git a/Marlin/Ender-3 Pro/Boot screens/Enderdragon_Bootscreen.h b/Ender-3 Pro/Marlin/Boot screens/Enderdragon_Bootscreen.h
similarity index 100%
rename from Marlin/Ender-3 Pro/Boot screens/Enderdragon_Bootscreen.h
rename to Ender-3 Pro/Marlin/Boot screens/Enderdragon_Bootscreen.h
diff --git a/Marlin/Ender-3 Pro/Status screens/Default_Statusscreen.h b/Ender-3 Pro/Marlin/Status screens/Default_Statusscreen.h
similarity index 100%
rename from Marlin/Ender-3 Pro/Status screens/Default_Statusscreen.h
rename to Ender-3 Pro/Marlin/Status screens/Default_Statusscreen.h
diff --git a/Marlin/Ender-3 Pro/UBL-ABL/Configuration.h b/Ender-3 Pro/Marlin/UBL-ABL/Configuration.h
similarity index 100%
rename from Marlin/Ender-3 Pro/UBL-ABL/Configuration.h
rename to Ender-3 Pro/Marlin/UBL-ABL/Configuration.h
diff --git a/Marlin/Ender-3 Pro/UBL-ABL/Configuration_adv.h b/Ender-3 Pro/Marlin/UBL-ABL/Configuration_adv.h
similarity index 100%
rename from Marlin/Ender-3 Pro/UBL-ABL/Configuration_adv.h
rename to Ender-3 Pro/Marlin/UBL-ABL/Configuration_adv.h
diff --git a/Ender-3 Pro/cura-config.md b/Ender-3 Pro/cura-config.md
new file mode 100644
index 0000000..210b758
--- /dev/null
+++ b/Ender-3 Pro/cura-config.md	
@@ -0,0 +1,71 @@
+# Ender-3 Pro Cura Settings
+
+## Start G-code
+
+```
+; Ender 3 Pro w/ BLTouch Start G-code
+G92 E0 ; Reset Extruder
+G28 ; Home all axes
+G1 Z10.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
+G1 X0 Y0
+
+M104 S{material_print_temperature_layer_0}
+M190 S{material_bed_temperature_layer_0}
+M109 S{material_print_temperature_layer_0}
+
+G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
+G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
+G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
+G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
+G92 E0 ; Reset Extruder
+G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
+G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
+M420 S1 ; Recall last bed level
+```
+
+## End G-code
+
+```
+G91 ;Relative positioning
+G1 E-2 F2700 ;Retract a bit
+G1 E-2 Z0.2 F2400 ;Retract and raise Z
+G1 X5 Y5 F3000 ;Wipe out
+G1 Z10 ;Raise Z more
+G90 ;Absolute positioning
+
+G1 X0 Y{machine_depth} ;Present print
+M106 S0 ;Turn-off fan
+M104 S0 ;Turn-off hotend
+M140 S0 ;Turn-off bed
+
+M84 X Y E ;Disable all steppers but Z
+```
+
+## Printer settings
+
+| Setting                         | Value       |
+| ---                             | ---         |
+| X (Width)                       | 220.0 mm    |
+| Y (Width)                       | 220.0 mm    |
+| Z (Height)                      | 250.0 mm    |
+| Build plate shape               | Rectangular |
+| Origin at center                | false       |
+| Heated bed                      | true        |
+| Heated build volume             | false       |
+| G-code flavor                   | Marlin      |
+| X min                           | -26 mm      |
+| Y min                           | -32 mm      |
+| X max                           | 32 mm       |
+| Y max                           | 34 mm       |
+| Gantry height                   | 25.0 mm     |
+| Number of Extruders             | 1           |
+| Apply Extruder offsets to GCode | true        |
+
+## Extruder settings
+
+| Setting                      | Value   |
+| ---                          | ---     |
+| Compatible material diameter | 1.75 mm |
+| Nozzle offset X              | 0.0 mm  |
+| Nozzle offset Y              | 0.0 mm  |
+| Cooling fan number           | 0       |
diff --git a/Ender-3 S1/cura-config.md b/Ender-3 S1/cura-config.md
new file mode 100644
index 0000000..62b6328
--- /dev/null
+++ b/Ender-3 S1/cura-config.md	
@@ -0,0 +1,71 @@
+# Ender-3 S1 Cura Config
+
+## Start G-code
+
+```
+; Ender 3 S1 Start G-code
+G92 E0 ; Reset Extruder
+G28 ; Home all axes
+G1 Z10.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
+G1 X0 Y0
+
+M104 S{material_print_temperature_layer_0}
+M190 S{material_bed_temperature_layer_0}
+M109 S{material_print_temperature_layer_0}
+
+G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
+G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
+G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
+G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
+G92 E0 ; Reset Extruder
+G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
+G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
+M420 S1 ; Recall last bed level
+```
+
+## End G-code
+
+```
+G91 ;Relative positioning
+G1 E-2 F2700 ;Retract a bit
+G1 E-2 Z0.2 F2400 ;Retract and raise Z
+G1 X5 Y5 F3000 ;Wipe out
+G1 Z10 ;Raise Z more
+G90 ;Absolute positioning
+
+G1 X0 Y{machine_depth} ;Present print
+M106 S0 ;Turn-off fan
+M104 S0 ;Turn-off hotend
+M140 S0 ;Turn-off bed
+
+M84 X Y E ;Disable all steppers but Z
+```
+
+## Printer settings
+
+| Setting                         | Value       |
+| ---                             | ---         |
+| X (Width)                       | 220.0 mm    |
+| Y (Depth)                       | 220.0 mm    |
+| Z (Height)                      | 270.0 mm    |
+| Build plate shape               | Rectangular |
+| Origin at center                | false       |
+| Heated bed                      | true        |
+| Heated build volume             | false       |
+| G-code flavor                   | Marlin      |
+| X min                           | -26 mm      |
+| Y min                           | -32 mm      |
+| X max                           | 32 mm       |
+| Y max                           | 34 mm       |
+| Gantry height                   | 25.0 mm     |
+| Number of extruders             | 1           |
+| Apply Extruder offsets to GCode | true        |
+
+## Extruder 1 settings
+
+| Setting                      | Value   |
+| ---                          | ---     |
+| Compatible material diameter | 1.75 mm |
+| Nozzle offset X              | 0.0 mm  |
+| Nozzle offset Y              | 0.0 mm  |
+| Cooling Fan Number           | 0       |